Sony MZ-N10 - Manual (Page 56)

56
Changing the order of a group
on a disc (Group Move)
1
While playing a track within a group
whose order you want to change,
press the jog dial.
2
Turn the dial until “EDIT” appears in
the display, and then press the jog
dial.
3
Turn the jog dial until “Move”
appears in the display, and then press
the jog dial.
4
Turn the jog dial until “ : Move”
appears in the display, and then press
the jog dial.
The group number to which the
currently playing track belongs
appears in the middle section of the
display. If the group has been labeled,
press the control key towards > to
display the group name. Press the
control key towards . to return to
the group number display.
5
Turn the jog dial to select the
destination point on the disc, and then
press the jog dial to enter the
selection.
To cancel moving
Press x for 2 seconds or more.
To return the preceding
setting
Press x.
For the remote control operation, see
page 70.
To erase a group
You can erase tracks in a selected group.
Note that once a recording has
been erased, you cannot retrieve it.
Be sure to check the contents of
the group before you erase it.
Note
You cannot erase tracks that have been checked
out from your computer. You cannot erase a
group if it contains a checked-out track. In this
case, check in the track or tracks to the
computer.
1
Select a group you want to erase and
check the contents (see “To cue to the
start of a group (Group Skip)”
(page 51)).
2
Press x.
3
Press the jog dial.
4
Turn the jog dial until “EDIT”
appears in the display, and then press
the jog dial.
5
Turn the jog dial until “Erase”
appears in the display, and then press
the jog dial.
Jog dial
5-way control key
(., >)
Example: Moving the first group in the
disc (Group01) to the position between
the second (Group02) and the third
(Group03) group.
Jog dial
x