Sony MZ-N10 - Manual (Page 47)

47
Dividing a track (Divide)
You can divide a track with a track mark,
creating a new track from the part
following the track mark. You can also
make fine adjustments to the track mark
position before making the actual
division. The track numbers will increase
as follows.
This function can be set with the recorder
only.
Note
You cannot add a track mark on a track that has
been checked-out from your computer.
Dividing a track directly
1
While playing or pausing an MD,
press T MARK on the recorder at the
point you want to mark.
“MARK ON” appears in the display,
and a track mark is added. The track
number will increase by one.
Adjusting the dividing point
before dividing a track (Divide
Rehearsal)
1
While playing, press T MARK for 2
seconds or more.
Four seconds of the track from the
point T MARK is pressed is played
back repeatedly.
2
Turn the jog dial to adjust the point to
divide.
Turning the jog dial moves the
dividing point forward or backwards.
The dividing point can be moved up
to a maximum of 8 seconds forward
or backwards from the point
T MARK was pressed in step 1.
3
Press the jog dial to enter the dividing
point.
1 3 4 2
2 3 1 4 5
Track marking
Track numbers increase.
T MARK
Jog dial
The point T MARK is pressed.
Four seconds of the track plays
back repeatedly.
The point
T MARK is
pressed in
step 1.
The moved four-second interval plays
back repeatedly.
The dividing point shifts
a maximum of 8 seconds
forward or backwards.