Sony UP-50 - Manual (Page 111)

111 Installation and Adjustment
L CD - CN T 5 R :
SYSTEM SETUP
LCD - CNTR : 5
BAUDRATE
BEEP
APPLI.
IRE
SAVE USER
PRN SETUP : PRESS [ > ]
USER NAME
Q1 A 1 S
COLOR : 200
: / 24 / 4800 / 96
: OFF / ON
: STANDARD /
: 100 / 11 / 12 / 13
: 1 / 2 / 3 [ EXEC ]
: PRESS [ > ]
L CD - CN T 7 R :
SYSTEM SETUP
LCD - CNTR : 7
BAUDRATE : / 24 / 4800 / 96
BEEP : OFF / ON
APPLI. : STANDARD /
IRE : 100 / 11 / 12 / 13
SAVE USER : 1 / 2 / 3 [ EXEC ]
PRN SETUP : PRESS [ > ]
USER NAME : PRESS [ > ]
Q1 A 1 S
COLOR : 200
S
PRN [ > ]
Y S T EM
SE T UP
S E T UP
SYSTEM SETUP
LCD - CONTR : 7
BAUDRATE
: / 24 / 4800 / 96
BEEP : OFF / ON
APPLI. : STANDARD /
IRE : 100 / 11 / 12 / 13
SAVE USER : 1 / 2 / 3 [ EXEC ]
PRN SETUP : PRESS [ > ]
USER NAME : PRESS [ > ]
Q1 A 1 S
COLOR : 200
3
Press the g button.
The SYSTEM SETUP menu appears.
4
Select LCD-CNTR by pressing the F or f button.
5
Adjust the brightness of the printer window display by pressing the G or g
button.
Note
If you select the left end scale, OFF is displayed. In this case, no messages
appears in the printer window display when the video monitor returns to the
regular screen.
6
Select PRN SETUP by pressing the F or f button, then press the g button.
The adjusted values are stored. The PRINTER SETUP menu appears.
7
Press the MENU button.
The regular screen appears.
Position the cursor at LCD-CNTR
by pressing the
F or f button.
Display LCD-CNTR by pressing
the
F or f button.
The number increases and the contrast increases every
time the
g button is pressed.
The number decreases and the contrast decreases every
time the
G button is pressed.