Setting up the printer (continued), I re, Select ire by pressing the f or f button – Sony UP-50 User Manual
Page 82: Press the menu button. the regular screen appears
82
Installation and Adjustment
1 0 0 / 1 1 / 1 2 / 1 3
SYSTEM SETUP
LCD - CONTR : 7
BAUDRATE
: / 24 / 4800 / 96
BEEP
: OFF / ON
APPLI.
: STANDARD /
IRE
: 100 / 11 / 12 / 13
SAVE USER : 1 / 2 / 3 [ EXEC ]
PRN SETUP : PRESS [ > ]
USER NAME : PRESS [ > ]
Q1 A 1 S
COLOR : 200
I RE
:
SYSTEM SETUP
LCD - CONTR : 7
BAUDRATE
: / 24 / 4800 / 96
BEEP
: OFF / ON
APPLI.
: STANDARD /
IRE
: 100 / 11 / 12 / 13
SAVE USER : 1 / 2 / 3 [ EXEC ]
PRN SETUP : PRESS [ > ]
USER NAME : PRESS [ > ]
Q1 A 1 S
COLOR : 200
I
1 0 0 / 1 1 / 1 2 / 1 3
RE
:
3
Select IRE by pressing the
F or f button.
4
Select the desired IRE value by pressing the
G or g button.
The selected IRE is displayed in three digits.
When
IRE value
Resetting to the standard adjustment
10
t
100
The printout is a little whitish.
11
t
110
The printout is whitish.
12
t
120
The printout is very whitish.
13
t
130
Note
Do not compensate for the input signal too much. Doing so results in the whole
of the printout becoming dark.
5
Press the MENU button.
The regular screen appears.
Position the cursor at IRE by
pressing the
F
or
f
button.
Press the
F
or
f
button until IRE appears.
Switch the desired IRE value to green
by pressing the
G
or
g
button.
Display the desired IRE value
by pressing the
G
or
g
button.
Setting Up the Printer (Continued)