Sony UP-50 - Manual (Page 113)

113 Installation and Adjustment
SYSTEM SETUP
LCD - CONTR : 7
BAUDRATE
: / 24 / 48 / 9600
BEEP : OFF / ON
APPLI. : STANDARD /
IRE : 100 / 11 / 12 / 13
SAVE USER : 1 / 2 / 3 [ EXEC ]
PRN SETUP : PRESS [ > ]
USER NAME : PRESS [ > ]
Q1 A 1 S
COLOR : 200
B E E P :
o n / OF F
Switch the desired operation to
green by pressing the
G or g button.
Display the desired operation in
capital letters by pressing the
G
or g button.
4
Select PRN SETUP by pressing the F or f button, then press the g button.
The adjusted values are stored. The PRINTER SETUP menu appears.
5
Press the MENU button.
The regular screen appears.
Setting the Baud Rate for Computer Communication
When controlling the printer with a computer connected to the printer’s RS-232C
connector, select the appropriate baud rate. For details, contact your nearest Sony
dealer.
1
Display the SYSTEM SETUP menu.
To display the SYSTEM SETUP menu, see steps 1 to 3 in “Adjusting the
Brightness of the Printer Window Display” on page 110.
2
Select BAUD RATE by pressing the F or f button.
2,4
3
4
5
B AUDRA T E :
SYSTEM SETUP
LCD - CONTR : 7
BAUDRATE
: / 24 / 48 / 9600
BEEP : OFF / ON
APPLI. : STANDARD /
IRE : 100 / 11 / 12 / 13
SAVE USER : 1 / 2 / 3 [ EXEC ]
PRN SETUP : PRESS [ > ]
USER NAME : PRESS [ > ]
Q1 A 1 S
COLOR : 200
1 2 / 2 9 6 0 0 4 / 4 8 /
Position the cursor at BAUD RATE by
pressing the
F or f button.
Display BAUD RATE by
pressing the
F or f button.
Continue to the next page c