Sony UP-50 - Manual (Page 86)

86 Installation and Adjustment
CO L OR AD J US T
/ CO L / l / p / i / o /
COLOR ADJUST COLOR : 200
/ COL / LAY / PRN / IN / OUT /
LOAD COLOR : 1 / 2 / 3 TEMP
: 1 / 2 / 3 [EXEC]
MAG – G R N : 0
YEL – BLU : 0
DARK
LIGHT
SHARPNESS
INTERPOL.
SAVE COLOR
C Y N – R E D : 0
Q1 A 1 S
: 0
: 0
: 8
: OFF / ON
Adjusting the Printout Color
You can adjust the printout quality by adjusting the color intensity, printout
sharpness and tone (GAMMA) of the printout.
Adjusting the color intensity, contrast and sharpness
You can adjust the color intensity (RED/GREEN/BLUE), contrast (DARK/
LIGHT) and printout sharpness (SHARPNESS/INTERPOL.). You can store up to
three settings.
These settings are managed according to the LOAD COLOR number. The color
intensity, picture contrast and sharpness of a printout are determined by recalling
one of the three settings according to their LOAD COLOR numbers. This is useful
when you are using more than one item of video equipment, each having different
characteristics, when you want to print images having different color qualities and
picture contrast, and when multiple users access a single printer.
Also, you can make a printout using temporarily set values, without erasing the
stored adjustment values.
Perform the adjustments while viewing the images stored in memory.
All values of the color intensity and contrast are factory-set to 0 and the
SHARPNESS is set to 8 for LOAD COLOR numbers 1, 2 and 3.
1
Press the R/G/B/D/L button on the sub panel.
The COLOR ADJUST menu appears.
Or press the MENU button and display the COLOR ADJUST menu by
pressing the
G or g button.
1 2,4,5
3,4,6
7
8
LOAD COLOR button
Setting Up the Printer (Continued)