Sony UP-50 - Manual (Page 16)

16 Operation
INPUT SETUP COLOR : 200
/ COL / LAY / PRN / IN / OUT /
INPUT SEL
: VIDEO / SV / R
HUE : 0
COLOR : 0
GAIN : 0
OFFSET : 0
AGC : OFF / ON
Q1 A 1 S
I
V I DEO / s v / r
NPU T S E L :
INPUT SETUP COLOR : 200
/ COL / LAY / PRN / IN / OUT /
: VIDEO / SV / R
HUE : 0
COLOR : 0
GAIN : 0
OFFSET : 0
AGC : OFF / ON
Q1 A 1 S
I
V I DEO / s v / r
NPU T S E L :
INPUT SEL
I
/ c / l / p / I N / o /
NPU T S E T UP
INPUT SETUP COLOR : 200
/ COL / LAY / PRN / IN / OUT /
INPUT SEL
: VIDEO / SV / R
HUE : 0
COLOR : 0
GAIN : 0
OFFSET : 0
AGC : OFF / ON
Q1 A 1 S
SOURCE/
MEMORY MEMORY PAGE CAPTURE PRINT
PRINT ALARM
POWER
Selecting the input signal on the menu
1
Turn on the video monitor and the printer.
2
Press the INPUT SETUP button.
The INPUT SETUP menu appears.
3
Select INPUT SEL by pressing the F or f button.
4
Select the desired input signal by pressing the G or g button.
5
Press the INPUT SETUP button.
The regular screen appears.
1
2,5
3
4
Position the cursor at INPUT SEL by
pressing the
F or f button.
Press the F or f button until
INPUT SEL appears.
Switch the desired input signal to green by
pressing the
G or g button. The selected input
signal turns green and is spelled out.
Display the spelled-out input signal by pressing
the
G or g button.
Before Printing (Continued)