Sony UP-50 - Manual (Page 110)

110 Installation and Adjustment
Setting Up the Printer (Continued)
S
PRE SS [ > ]
Y S T EM :
PRINTER SETUP COLOR : 200
/ COL / LAY / PRN / IN / OUT /
PRINT QTY.
: 1 [ 1 ~ 9 ]
INTERVAL : OFF / ON
GAMMA : S / NORMAL / H
: OFF / ON
LOAD USER : 1 / 2 / 3 [ EXEC ]
SYSTEM
: PRESS [ > ]
FUNCTION : PRESS [ > ]
C - BALANCE : PRESS [ > ]
Q1 A 1 S
PRN SPEED : / HIGH
MOTION CHK
Adjusting the Brightness of the Printer Window
Display
When it is hard to read the contents of the printer window display, adjust the
brightness using the menu.
1
Press the MENU button, then select PRN by pressing the G or g button.
The PRINTER SETUP menu appears on the source image.
2
Select SYSTEM by pressing the F or f button.
1,7
2,4,6
3,6
1,5
: / HIGH PRN SPEED
MOTION CHK
P
/ c / l / PRN / i / o /
R I N T ER S E T UP
PRINTER SETUP COLOR : 200
/ COL / LAY / PRN / IN / OUT /
PRINT QTY.
: 1 [ 1 ~ 9 ]
INTERVAL : OFF / ON
GAMMA : S / NORMAL / H
: OFF / ON
LOAD USER : 1 / 2 / 3 [ EXEC ]
SYSTEM
: PRESS [ > ]
FUNCTION : PRESS [ > ]
C - BALANCE : PRESS [ > ]
Q1 A 1 S
Switch PRN to green by pressing
the
G or g button.
Display PRN in capital letters
by pressing the
G or g button.
Position the cursor at SYSTEM
by pressing the
F or f button.
Press the F or f button until
SYSTEM appears.