Sony UP-50 - Manual (Page 112)

112 Installation and Adjustment
Setting Up the Printer (Continued)
SYSTEM SETUP
LCD - CONTR : 7
BAUDRATE
: / 24 / 48 / 9600
BEEP : OFF / ON
APPLI. : STANDARD /
IRE : 100 / 11 / 12 / 13
SAVE USER : 1 / 2 / 3 [ EXEC ]
PRN SETUP : PRESS [ > ]
USER NAME : PRESS [ > ]
Q1 A 1 S
COLOR : 200
B E E P :
OF F / o n
Selecting Whether the Operation and Error Tones
Sound
Whenever you press a button on the front panel or sub panel, the operation tone
sounds (one time). When an error occurs, the alarm tone sounds (three times). You
can turn these tones on and off using the menu.
1
Display the SYSTEM SETUP menu.
To display the SYSTEM SETUP menu, see steps 1 to 3 in “Adjusting the
Brightness of the Printer Window Display” on page 110.
2
Select BEEP by pressing the F or f button.
3
Select whether the operation and error tones sound by pressing the G or g
button.
When you want to Selection
Sound the tones. ON
Disable the tones. OFF
2,4
3
4
5
Position the cursor at BEEP by
pressing the
F or f button.
Display BEEP by pressing
the
F or f button.