Sony UP-50 - Manual (Page 140)

140 Others
Q1 A 16: 9 S
C
Q1 A 16: 9 S
1 C (Caption) display section
C is displayed in white when the printer is set
to print a caption.
2 Message display section
Messages are displayed.
3 Ink ribbon type and remaining amount of
ink ribbon display section
Displays the ink ribbon type and the
remaining amount of ribbon (indicates the
number of printouts that can still be made
with the ribbon) when the ribbon remaining
display function is set to ON.
4 S or M (image type) display section
Indicates the type of image being displayed
on the monitor screen.
S (Source): The image from the input signal
source is displayed on the screen.
M (Memory): The image stored in memory is
displayed on the screen.
5 Printer operation mode display section
Indicates the printer application mode
(STANDARD or DUPLICATE) or type of
printouts such as multiple reduced images.
Examples:
1: Indicates that full-size image and the
STANDARD mode are selected.
4: Indicates that four-reduced images and the
STANDARD mode are selected
16F: Indicates that 16-reduced images with
white borders and the STANDARD mode are
selected. When SEPARATE (image with
white borders) is set to ON on the LAYOUT
SETUP menu, F is attached.
DUP1: Indicates that full-size image and the
DUPLICATE mode are selected.
DUP4: Indicates that four-reduced images
and the DUPLICATE mode are selected.
a: Indicates the type of printout
b: Indicates the position where the cursor is currently
placed and where an image will be captured.
6 Memory page display section
Indicates the currently selected memory page.
While the image in the memory page is being
printed, the memory page indication blinks in
green. The memory page whose memory
image is queued to be printed blinks in white.
7 Q (print quantity) display
Indicates the number of copies to be printed.
This item blinks while the printer is busy.
8 Printer setting status display section
The corresponding currently selected status is
displayed when one of the LOAD USER,
LOAD COLOR, MULTI PICTURE, PRINT
QTY, INPUT SELECT, MEMORY FRM/
FLD, DISPLAY, RIBBON REMAIN or
CAPTION ON/OFF buttons is pressed.
Location and Function of Parts and Controls (Continued)
Monitor Display
There are two types of display: a regular screen display and a menu screen
display. The two types of display are explained using the monitor display.
Regular screen display
When you first turn on the printer, the regular screen message appears.