Sony UP-50 - Manual (Page 17)

17 Operation
Q 1 A S
Q1 A 1 S
1
SOURCE/
MEMORY MEMORY PAGE
CAPTURE PRINT
PRINT ALARM
POWER
Making Full-Size Image Printouts
This section explains how to make a full-size image printout. The operations
described here constitute the basic procedure for making a printout.
Before making a full-size image printout
• All connections should have already been made. (See page 74.)
• Ensure that the appropriate ink ribbon/paper set is being used and that they are
correctly loaded. (See pages 9, 12 and 124.)
• Select the input signal to be used to make a printout. (See page 14.)
• Set the printer to capture one full-size image into memory. (See page 36.)
• Select the appropriate memory page. (See page 38.)
• Confirm the printout color quality (using, for example, the LOAD COLOR
number) (See page 86.)
1
Turn on the video monitor and the printer.
2
Start the video source to display the source image on the video monitor.
This operation is done using the controls of the video equipment acting as the
source.
SOURCE/MEMORY button
RIBBON REMAIN button
MEMORY FRM/FLD button
DISPLAY button
1
3
4
Video monitor screen
Printer window display
Shows that the image from the source equipment
is displayed on the screen.
Continue to the next page c