Kenwood KRF-X9992D - Manual (Page 34)

Chapter One : Connecting Your Devices Audio-Video Receiver KRF-X9992D
Connections
28
Connecting Your Turntable/Record Player
Do not plug in the receiver to AC power until you
have connected all your devices.
This section focuses on the connections from your
turntable/record player to the KRF-X9992D. Please
refer to your turntable/record player’s instructions
for more detail about its connection jacks and
capabilities.
To Connect a Turntable/Record Player:
1. Connect the audio cables from the turntable
audio output jacks to the receiver’s PHONO R
and L jacks.
2. If your turntable includes a ground cable,
connect the ground cable to the receiver’s
PHONO ground jack.
3. Go to “Noting Your Devices” on page␣ 3 and note
which jacks you used to connect your turntable.
In addition, note the brand name and model
number of the turntable.
AUDIO OUT
GROUND