Kenwood KRF-X9992D - Manual (Page 69)

Using P
o
w
erT
ouch
10 Audio-Video Receiver KRF-X9992D
How Do I Adjust the Sound?
You can control and adjust a variety of sound settings using the
receiver’s front panel or PowerTouch.
Turning the Speakers On
To turn the Front A speakers on, press SPEAKER A on the
receiver’s front panel. The red light indicates that the speakers
are on.
To turn the Front B speakers on, press SPEAKER B on the
receiver’s front panel. The red light indicates that the speakers
are on.
If you select SPEAKER B while listening to a surround mode, the
sound will automatically revert to stereo. If you manually select
a surround mode while SPEAKER B is on, SPEAKER B will
automatically shut off.
If you use speakers connected to amplifiers via the PRE OUT
jacks, choose Front A speakers.
Adjusting the Volume
Use one of the following methods to adjust the volume.
• Turn the volume knob on the front panel of the receiver.
• Press
V
O
LU
M E
UP
DOWN
in the appropriate direction on PowerTouch.
How Do I Adjust the Sound?