Kenwood KRF-X9992D - Manual (Page 98)

Using P
o
w
erT
ouch
Audio-Video Receiver KRF-X9992D 39
4. If you haven’t already done so on the CD changer, touch
. This reads all of the disc and track title information
into the CD changer’s memory.
5. Set PowerTouch down so that its IR transmitter window is
aiming at the receiver’s IR transmitter window. Select .
Do not move PowerTouch while it is reading data.
This process may take some time, depending on how many
CDs you have loaded. When the IR light on the receiver goes
out, the receiver is done sending the information to
PowerTouch, and you may move PowerTouch again.
PowerTouch’s memory now contains the disc titles of every
CD in the changer with title information.
6. Touch to return to the CD controls.
7. Touch m
u
s
i c
on Quick Access menu to return to the Music
menu.
To read the loaded track titles and store them in PowerTouch:
1. Make sure you have followed the previous instructions to
read disc data.
2. Touch on the main or Quick Access menu.
3. Touch .
4. If you haven’t already done so on the CD changer, touch
. This reads all of the disc and track title information
into the CD changer’s memory. Touch to return to the CD
controls.
How Do I Operate Devices?