Connecting a camcorder or additional vcr – Kenwood KRF-X9992D User Manual
Page 35
29
Chapter One : Connecting Your Devices
Audio-Video Receiver KRF-X9992D
Connections
Connecting a Camcorder or Additional VCR
This section focuses on the connections from your
camcorder or VCR to the front of the KRF-X9992D.
Please refer to your camcorder or VCR’s instructions
for more detail about its connection jacks and
capabilities.
These instructions describe how to connect a
camcorder or VCR quickly and probably temporarily
to the front of the receiver. If you want a less
cluttered and more permanent connection, see “Can
I Connect an Additional VCR Permanently?”, below.
To Connect a Camcorder or Additional
VCR:
Connect the audio and video cables from the
camcorder or VCR’s Audio and Video jacks to the
receiver’s front panel jacks as shown to the left.
Can I Connect an Additional VCR
Permanently?
Yes. To do so, follow the instructions under “To
Connect a Secondary VCR:” on page␣ 13.
VIDEO OUT
S-VIDEO OUT
AUDIO OUT
(or additional VCR)