Connections – Kenwood KRF-X9992D User Manual

Page 36

Advertising
background image

Chapter One : Connecting Your Devices

Audio-Video Receiver KRF-X9992D

Connections

30

What if I Have Several Kenwood Devices (System Control Chaining)?

Kenwood provides convenient control of the entire
system via two control modes:

• SL16, which allows you to connect SL16 devices

only

• XS8, which allows you to connect XS, XS8, and

XR devices

You cannot mix SL16 and XS8 settings. All devices
connected via system control cables must use the
same setting.

An Example of SL16 Chained
Connections:

An Example of XS8 Chained
Connections:

To switch between the two modes :

1. Slide the selector switch (shown below) from

SL16 (the factory-set default) to XS8.

2. Turn the receiver’s power switch off, and on

again.

System Control connection allows you to:

• See the current status of the selected source

device, such as Play or Stop (SL16 devices only).

• control connected devices via the remote

• switch the receiver’s input automatically to a

connected device when you start playback from
that device

• synchronize recording a CD automatically when

you start playback from the connected CD player

Make sure the units are connected to the correct
jacks on the receiver—for example, no device
connected to the CD2/TAPE 2 MONITOR jacks can
use a system control cable.

Some CD players and cassette decks do not support
the SL16 system control mode. Do not include these
devices in a set of SL16 chained connections; where
appropriate, use the XS8 mode instead.

Do not mix connections of the two modes: if a
device does not support the mode you are using for
chaining, do not connect that device.

Do not connect system control cables to any device
not specified by Kenwood. Using system control
functions with a device that does not support them
can damage the device.

Make sure system control plugs are firmly seated in
the appropriate jacks.

Receiver

MD Recorder

Tape Deck

CD Player

Record Player

SYSTEM
CONTROL
cord

Receiver

MD Recorder

Tape Deck

CD Player

Record Player

SYSTEM
CONTROL
cord

[SL16] [XS8]

[SL16] [XS] [XS8]

[SL16]

[SL16] [XS] [XS8] [XR]

[XS]

[SL16] [XS8]

[SL16] [XS] [XS8]

[SL16]

[SL16] [XS] [XS8] [XR]

[XS]

Advertising