List of connected vpn clients, 3 list of connected vpn clients – Kerio Tech KERIO WINROUTE FIREWALL 6 User Manual
Page 242
Chapter 19
Status Information
242
For each item either a color or the Default option can be chosen. Default colors are set in the
operating system (the common setting for default colors is black font and white background).
Font Color
•
Active connections — connections with currently active data traffic
•
Inactive connections — TCP connections which have been closed but 2 minutes
after they were killed they are still kept active — to avoid repeated packet mis-
handling)
Background Color
•
Local connections — connections where an IP address of the host with WinRoute
is either source or destination
•
Inbound connections — connections from the Internet to the local network (al-
lowed by firewall)
•
Outbound connections — connections from the local network to the Internet
Note: Incoming and outgoing connections are distinguished by detection of direction of
IP addresses — “out” (SNAT) or “in” (DNAT). For details, refer to chapter
19.3 List of connected VPN clients
In Status → VPN clients, you can see an overview of VPN clients currently connected to the
WinRoute’s VPN server.
Figure 19.10
List of connected VPN clients
The information provided is as follows:
•
Username used for authentication to the firewall. VPN traffic is reflected in statistics
of this user.
•
The operating system on which the user have the Kerio VPN Client installed.
•
DNS name of the host which the user connects from. If WinRoute cannot resolve the
corresponding hostname from the DNS, its (public) IP address is displayed instead.
•
IP address assigned to the client by the VPN server. This IP address “represents” the
client in the local network.
•
Session duration.
•
Kerio VPN Client version, including build number.
The following columns are hidden in the default settings of the VPN clients window (for details
on showing and hiding columns, see chapter
):