Kerio Tech KERIO WINROUTE FIREWALL 6 - Manual (Page 284)

Chapter 23 Kerio VPN
284
• No special user accounts must be created for VPN clients. User accounts in WinRoute
(or domain accounts if the Active Directory is used — see chapter 10.1 ) are used for
authentication.
• Statistics about VPN tunnels and VPN clients can be viewed in WinRoute (refer to chap-
ter 20.2 ).
23.1 VPN Server Configuration
VPN server is used for connection of remote endpoints of VPN tunnels and of remote clients
using Kerio VPN Client.
Note: Connection to the VPN server from the Internet must be first allowed by traffic rules. For
details, refer to chapters 23.2 and 23.3 .
VPN server is available in the Interfaces tab of the Configuration → Interfaces section as a spe-
cial interface.
Figure 23.1 Viewing VPN server in the table of interfaces
Double-click on the VPN server interface (or select the alternative and press Edit, or select Edit
from the context menu) to open a dialog where parameters of the VPN server can be set.
VPN subnet and SSL certificate
Enable VPN server
Use this option to enable /disable VPN server. VPN server uses TCP and UDP protocols,
port 4090 is used as default (the port can be changed in advanced options, however, it is
usually not necessary to change it). If the VPN server is not used, it is recommended to
disable it.