Kerio Tech KERIO WINROUTE FIREWALL 6 User Manual
Page 314
Chapter 23
Kerio VPN
314
This step will create rules for connection of the VPN server as well as for communication
of VPN clients with the local network (through the firewall).
Figure 23.33
Headquarter — default traffic rules for Kerio VPN
3.
Customize DNS configuration as follows:
•
In the WinRoute’s DNS module configuration, enable DNS forwarder (forwarding
of DNS requests to other servers).
•
Enable the Use custom forwarding option and define rules for names in the
filial1.company.com
and filial2.company.com domains. To specify the for-
warding DNS server, always use the IP address of the WinRoute host’s inbound
interface connected to the local network at the remote side of the tunnel.
Figure 23.34
Headquarter — DNS forwarding settings
•
Set the IP address of this interface (10.1.1.1) as a primary DNS server for the
WinRoute host’s interface connected to the LAN 1 local network. It is not necessary
to set DNS at the interface connected to LAN 2.
•
Set the IP address 10.1.1.1 as a primary DNS server also for the other hosts.