Kerio Tech KERIO WINROUTE FIREWALL 6 User Manual
Page 63
6.3 Connection Failover
63
Warning
Connection failover is relevant only if performed by a persistent connection (i.e. the primary
connection uses a network card or a persistently connected dial-up). Failing that, the sec-
ondary connection would be activated upon each hang-up of the primary link automatically.
Configuration with the wizard
On the second page of the Traffic Policy Wizard (see chapter
), select Multiple Internet Links
— Failover.
Figure 6.9
Traffic Policy Wizard — Internet connection failover
In the third step of the wizard, select a network interface for the primary connection (leased
or persistent dial-up link) and for the secondary connection (leased or dial-up link). If login
data for the selected telephone connections are not saved in the operating system, enter the
valid username and password.
In the Software Appliance / VMware Virtual Appliance edition, the wizard allows:
•
to configure parameters of the selected primary and secondary interface,
•
to create a new primary or/and secondary interface (PPPoE, PPTP or dial-up).
For details on network interfaces, see chapter