Kerio Tech KERIO WINROUTE FIREWALL 6 User Manual
Page 291
23.3 Interconnection of two private networks via the Internet (VPN tunnel)
291
23.3 Interconnection of two private networks via the Internet (VPN tunnel)
WinRoute with support for VPN (VPN support is included in the typical installation) must be
installed in both networks to enable creation of an encrypted tunnel between a local and
a remote network via the Internet (“VPN tunnel”).
Note: Each installation of WinRoute requires its own license (see chapter
Setting up VPN servers
First, the VPN server must be allowed by the traffic policy and enabled at both ends of the
tunnel. For detailed description on configuration of VPN servers, refer to chapter
Definition of a tunnel to a remote server
VPN tunnel to the server on the other side must be defined at both ends. Use the Add → VPN
tunnel option in the Interfaces section to create a new tunnel.
Figure 23.8
VPN tunnel configuration