Konica Minolta BP-200 - Manual (Page 243)

6 Internet faxing
6-22 200/250/350
Int
e
rnet fax
in
g
Ch
apt
er
6
* The receiving machine prints these items when “Yes” is specified on the RX
Doc. Header Print screen.
**Changes to ( ) if the optional fax kit has been installed.
Specifying the transmission source setting
Entered text such as the name, fax number, and address can be printed at
the top of the output page.
1
Touch [Menu].
– If the optional fax kit has been installed, touch [FAX Menu].
2
Touch [Setting 1], then [TSI].
– If the optional fax kit has been installed, touch [Set 1], then [TSI].
Network
**(Net.) Subject Se-
lection
*
The subject line of an e-mail message can be selected from subject
lines registered in advance.
Reply Ad-
dress
*
Displays the e-mail address of this machine as the sender of the e-
mail message. When specifying e-mail addresses other than that of
this machine, select an address from a registered one-touch dial but-
ton.
File Name Enter when a set file name is to be specified as the file name when
saving the file. Up to 16 characters can be entered.
2
Note
The file name in Network functions only when the desti-
nation is a computer e-mail address.
Item Description
FROM: NEWYORK
Image data has been attached to the e-mail.
SCANReady Fine Chain
TSI
TSI only
TX Report
2in1 2-Sided TX Rotation TX
Network Setting 1 Setting 2
One-Touch Search Direct
Input
Quality&
Reduction
Menu
Job List 100% Memory
Free