Konica Minolta BP-200 - Manual (Page 44)

Setup 2
200/250/350 2-11
Se
tu
p
Ch
apte
r 2
3
Use the keypad to type in the IP address.
– You cannot specify an IP address that begins with 0, 127, or 224 or
higher.
– When less than three digits are entered, use [→] to move the cursor
to the next number.
4
Touch [Enter].
Subnet Mask
Specify a setting when “DHCP” is set to “IP Input”.
1
In the Network Setting screen, touch [Basic Settings].
2
Touch [Subnet Mask].
Enter IP Address.
Utility/Counter
IP Address Setting Enter Cancel
Delete
192.168.1 .20
100% Memory
Free
Basic Settings
Enter Cancel
DHCP
IP Addres Setting
Subnet Mask
Gateway
IP Input
Self-Domain Name
Network Board Set Auto
. . .
. . .
. . .
100% Memory
Free