To specify initial network settings, To specify initial network settings -6 – Konica Minolta BP-200 User Manual
Page 39
2
Setup
2-6
200/250/350
Se
tu
p
Ch
apte
r 2
2
Reminder
If the [Utility/Counter] key was pressed to register items and specify set-
tings, be sure to press the [Reset] key in the control panel after returning
to the initial screen.
To specify initial network settings
1
Press the [Utility/Counter] key.
2
Touch [Admin. Management].
3
Type in the administrator password using the keypad, and then touch
[Enter].
–
“12345678” is registered at the factory.
–
To change the administrator password, refer to the User’s Guide
[Copy Operations].
Exit
User
Management
Reports
Admin.
Management
User
Setting
Utility/Counter
Check
Detail
Total
Counter
Total Copy
Counter
Total
Copy Size
357
285
5
Printer
Setting
100%
Memory
Free
Input Administrator Code.
Utility/Counter
Administrator Code
Enter
Cancel
100%
Memory
Free