Konica Minolta BP-200 - Manual (Page 345)

8 Specifying settings using PageScope Web Connection
8-66 200/250/350
S
p
e
c
if
y
ing
se
tti
ngs
us
in
g P
age
Sc
op
e W
eb C
onne
ct
ion
Ch
apte
r 8
2
Note
If bit 7 of mode 466 is set to “1” in the Soft SW Setting screen, select
“GSS-SPNEGO” beside “Authentication Setting”. For details on the soft-
ware switch settings, refer to “Specifying software switch settings (ma-
chine functions)” on page 9-29.
If bit 7 of mode 466 is set to “1” in the Soft SW Setting screen, the infor-
mation entered beside “Login Name” and “Password” is used when
checking the connection. For details on the software switch settings, re-
fer to “Specifying software switch settings (machine functions)” on
page 9-29.
Registering an LDAP server
1
In the Administrator mode, click the Network tab.
– For the procedure to log on to Administrator mode, refer to “Log-
ging on to Administrator mode” on page 8-8.
2
Click [Common Setting], then [LDAP Server Setting].
3
Click a box containing “---” for the LDAP server to be registered.