Konica Minolta BP-200 User Manual
Page 418
Specifying management settings
9
200/250/350
9-49
Spe
c
if
y
ing
ma
nag
eme
n
t s
e
tti
ng
s
Chap
ter
9
(*1)
The SMTP authentication function is enabled when all of the conditions
described below have been met.
-
Bit 6 of mode 380 is set to “1”.
-
The SMTP authentication user name & password and the POP3 user
name & password are being shared, and bit 2 of mode 380 is set to “0”.
-
The SMTP authentication user name and & password and the POP3 user
name & password are not being shared, bit 2 of mode 380 is set to “1”,
and “SMTP Authentication User Name” and “SMTP Authentication User
Password” are specified in the Network Settings screen.
-
Either bit 5, 4, or 3 of mode 380 is set to “0”.
(*2)
When all of the authentication functions are enabled (bits 5, 4, and 3 are
set to “0”), the priority is given in the order of “CRAM-MD5 authentication (bit
5)”, “LOGIN authentication (bit 4)”, and “PLAIN authentication (bit 3)”.
5
Specifies whether to prohibit
the e-mail transmission au-
thentication (CRAM-MD5
authentication) function.(*2)
0
Not prohibited
---------
1
Prohibited
4
Specifies whether to prohibit
the e-mail transmission au-
thentication (LOGIN authen-
tication) function.(*2)
0
Not prohibited
1
Prohibited
3
Specifies whether to prohibit
the e-mail transmission au-
thentication (PLAIN authen-
tication) function.(*2)
0
Not prohibited
---------
1
Prohibited
2
Specifies whether to enable
sharing of the SMTP authen-
tication ID & password with
the POP3 user name & pass-
word.
0
ID and password shared
---------
1
ID and password not shared
1, 0
-----------------------------
00
*Do not change these bits
when specifying settings for
this function.
---------
Bit
Description
Status
Description
Page Ref-
erence