Konica Minolta BP-200 - Manual (Page 41)

2 Setup
2-8 200/250/350
Se
tu
p
Ch
apte
r 2
7
Specify each network setting, and then touch [Enter].
8
To apply the settings specified on a screen that is displayed by touch-
ing a button marked with
, turn the machine off, then on again.
– When turning the machine off, then on again with the main power
switch, wait about 10 seconds to turn the machine on after turning
it off.
The machine may not operate correctly if it is turned on immediately
after being turned off.
9
Touch [Enter] until the first screen appears.
Network Setting
Basic
Settings
DNS Settings
Machine Name SMTP Settings
POP3 Settings Priority Compress
Level
LDAP Setting Scanner Settings
Frame Type Set
Enter
IP Filtering
100% Memory
Free
Cancel
Turn the power off and then
on to use new setting.
100% Memory
Free