Konica Minolta BP-200 - Manual (Page 84)

Setup 2
200/250/350 2-51
Se
tu
p
Ch
apte
r 2
3
Touch [Enable] or [Disable].
4
Touch [1] of the range.
5
Touch [Start], and then type in the IP address at the beginning of the
range.
– To change an entered value, touch [ ←] and [→] to move the cursor
to the number to be changed, touch [Delete], and then type in the
desired number.
– To clear all entered values, press the [C] (clear) key.
6
Touch [Enter], and then touch [Enter] in the next two screens that ap-
pear.
IP filtering is specified.
1
100% Memory
Free
Accept
Setting
Enable Disable
Enter
Utility/Counter
Enter the IP Address range to permit
access.
Cancel
. . . - . . .
2 . . . - . . .
3 . . . - . . .
Set the IP Address.
Utility/Counter
Permit
Delete
. . . Start
Enter Cancel
. . . End
100% Memory
Free