Konica Minolta BP-200 - Manual (Page 419)

9 Specifying management settings
9-50 200/250/350
Spe
c
if
y
ing
ma
nag
eme
n
t s
e
tti
ng
s
Chap
ter
9
Specifying use of registered user authentication information to log on to
the LDAP server (mode 466)
Specify whether or not user names and passwords registered with user au-
thentication are used to log on to the LDAP server.
Factory settings
Specifying settings
The shaded cells indicate the settings selected during production.
!
Detail
The information for the LDAP server to be connected to must be regis-
tered in order to use the LDAP server. In addition, when LDAP and user
authentication are synchronized, select “Active Directory” as the user au-
thentication method. Select “GSS-SPNEGO” as the LDAP authentication
method. For details on the user authentication method, refer to the User’s
Guide [Copy Operations]. For details on the LDAP authentication meth-
od, refer to “LDAP Setting” on page 2-44 or “LDAP (Administrator mode)”
on page 8-64.
Bit 7 6 5 4 3 2 1 0
Setting 0 0 0 0 0 0 0 0 (HEX: 00)
Bit Description Setting Description Page
Refer-
ence
7 Specifies whether or not the
user name/password used
for external server authenti-
cation is used to log on to
the LDAP server. 0 Not used for logon ---------
1 Used for logon
6, 5, 4, 3,
2, 1, 0 ----------------------------- 0000000 *Do not change these bits
when specifying settings for
this function. ---------