4 specifying additional functions, Specifying additional functions -20 – Konica Minolta BP-200 User Manual

Page 113

Advertising
background image

3

Scan to E-Mail

3-20

200/250/350

Sc

an to

E

-Mai

l

Chap

ter

3

3.4

Specifying additional functions

You can add the following functions by pressing the [Fax/Scan] key on the
control panel, then touching [Menu] on the screen that appears.

2

Note

If the optional fax kit has been installed, [Menu] changes to [Fax Menu].

2

Note

The following functions have no effect, even if settings have been speci-
fied.
- “TSI” on the Setting 1 tab
- “Rotation TX” on the Setting 1 tab
- “E-Mail Notification” on the Network tab

* Changes to ( ) if the optional fax kit has been installed.

Item

Description

Setting 1
*(Set 1)

TX Report

Select under which conditions the transmission report is to be output.
Default: Outputs according to the specifications of the administrator.
ON: Prints regardless of the transmission results.
If TX Fails: Prints only when undeliverable.
OFF: Does not print regardless of the transmission results.

2in1

Select whether to send using the 2in1 function (printing two pages to
fit on one page).

2-Sided TX

Select whether to perform double-sided transmission. You can specify
the position of the binding margin and the document orientation.

Setting 2
*(Set 2)

Priority TX

Select whether a job is given priority over other.

Timer TX
Setting

Select whether to set the send time. Specifies the send time when
“ON” is selected.

Stamp

Specify whether the document is stamped to indicate that it has been
scanned. The document must be loaded into the ADF.

2

Note

To use the Stamp function, optional stamp unit must be
installed.

Network
*(Net.)

Subject
Selection

The Subject line of an e-mail can be selected from Subject lines spec-
ified in advance.

Reply Ad-
dress

Displays the e-mail address of this machine as the sender of the e-mail
message. When specifying e-mail addresses other than that of this
machine, select an address from a registered one-touch dial button.

File Name

Enter when a set file name is to be specified as the file name when sav-
ing the file. Up to 16 characters can be entered.

Advertising
This manual is related to the following products: