Konica Minolta BP-200 - Manual (Page 19)

Introduction
x-18 200/250/350
User’s Guides
The following User’s Guides have been prepared for this machine.
User’s Guide [Copy Operations]
This manual contains details on basic operations and the operating proce-
dures for the various copy functions.
-
Refer to this User’s Guide for details on operating procedures for copy
functions, including precautions on installation/use, turning the machine
on/off, loading paper, and troubleshooting operations such as clearing
paper misfeeds.
User’s Guide [Network Scanner Operations] (this manual)
This manual contains details on specifying network functions for standard
equipment and on operations for scanning functions.
-
Refer to this User’s Guide for details on operating procedures for network
functions and for using the Scan to E-Mail, Scan to FTP, Scan to SMB
and Internet fax operations.
User’s Guide [Box Operations]
This manual contains details on operating procedures for using the Box func-
tions.
-
Refer to this User’s Guide for details on printing a proof copy or a locked
job and on functions that use the optional hard disk drive, such as routing
and saving documents in boxes.
User’s Guide [Print Operations]
This manual contains details on operating procedures using the standard
built-in printer controller.
-
For details on the printing functions, refer to User’s Guide (PDF file) on
User Software CD-ROM.
Quick Guide [Print Operations]
This manual contains details on operating procedures using the standard
built-in printer controller.
-
Refer to this Quick Guide for basic operating procedures on the printing
functions.
User’s Guide [Advanced Scan Operations]
This manual contains details on the operating procedures for the functions
that can be used when the optional scanner unit is installed.
-
Refer to this User’s Guide for details on using the IP address faxing, IP
Relay and Scan to PC operations and on using IP Scanner.