Konica Minolta BP-200 - Manual (Page 201)

5 Scan to SMB
5-16 200/250/350
S
c
a
n
to
SM
B
Cha
p
ter 5
Specifying the transmission report printing conditions
You can specify the conditions for printing a transmission report (TX Report).
The printing conditions for a transmission report are preset with the Report
Settings parameters from the Administrator Management screen. Select the
appropriate printing conditions.
Settings can be specified for the following.
To specify the transmission report printing conditions
1
Touch [Menu].
– If the optional fax kit has been installed, touch [FAX Menu].
Setting Description
Default Displays the printing conditions specified in the Administrator
Management screen.
ON Prints regardless of the results.
If TX Fails Prints when the transmission failed.
OFF Does not print regardless of the results.
One-Touch Search Direct
Input
Quality&
Reduction
Menu
Job List
SCANReady Fine Chain
100%
IndexList JPN US
Tokyo Osaka Nagoya Fukuok
a
Center
1
Center
2
Memory
Free