4 if transmission could not be completed, Viewing a transmission report, If transmission could not be completed -26 – Konica Minolta BP-200 User Manual
Page 211: Viewing a transmission report -26, Sc a n to sm b cha p ter 5, Detail
5
Scan to SMB
5-26
200/250/350
S
c
a
n
to
SM
B
Cha
p
ter 5
5.4
If transmission could not be completed
If the transmission could not be completed correctly, a transmission report
is printed.
!
Detail
You can change the transmission report printing conditions. For details,
refer to “Specifying the transmission report printing conditions (Report
Settings)” on page 9-18.
Viewing a transmission report
The following document has not been transmitted. Try to retransmit.
P.1
(TUE) APR 19 2006 10:31
CHICAGO
User/Account
:SALES
DESTINATION
:NEW YORK
ADDRESS
:192.168.1.111
PAGES
:1page
RESULT
:ED09C6
DOCUMENT#
:6614316-761
TIME STORED :APR 1910:24
TX START
:APR 1910:30
DURATION
:6 sec
MODE
:SMB
IMAGE
2
1
3
4
5
No.
Item
Description
1
Report output date and time
Shows the date and time that the report was printed.
2
Transmission source infor-
mation (TSI)
Shows the registered transmission source name.
3
Transmission information
Shows the document number, the duration of the
transmission, and the transmission mode.
4
Transmission result
Shows the transmission result. Any of the following
may appear.
OK: The transmission was completed successfully.
INTERR: The transmission was interrupted.
F. MEM: The memory capacity was exceeded.
NG: The transmission failed.
PT. DEL: The transmission to some destinations failed.
Error code: For details, refer to “Network error list” on
page 11-3.
5
Transmission image
Shows a part of the sent image.