Konica Minolta BP-200 - Manual (Page 323)

8 Specifying settings using PageScope Web Connection
8-44 200/250/350
S
p
e
c
if
y
ing
se
tti
ngs
us
in
g P
age
Sc
op
e W
eb C
onne
ct
ion
Ch
apte
r 8
Specifying the transmission settings
1
In the Administrator mode, click the Scan tab.
– If the optional fax kit has been installed, click the Fax/Scan tab.
– For the procedure to log on to Administrator mode, refer to “Log-
ging on to Administrator mode” on page 8-8.
2
Click [TX Settings].
3
Specify settings for each parameter, and then click [Apply].
Com. Mode
Select whether or not each communication mode can be used.
1
In the Administrator mode, click the Scan tab.
– If the optional fax kit has been installed, click the Fax/Scan tab.
2
Click [TX Settings].
3
Click [Com. Mode].
4
Specify a setting for each parameter, and then click [Apply].