Konica Minolta BP-200 - Manual (Page 335)

8 Specifying settings using PageScope Web Connection
8-56 200/250/350
S
p
e
c
if
y
ing
se
tti
ngs
us
in
g P
age
Sc
op
e W
eb C
onne
ct
ion
Ch
apte
r 8
8.13 Report Settings (Administrator mode)
The conditions for outputting the transmission results report and activity re-
port can be specified.
Settings can be specified for the following.
Item Description
TX Report
(Single
destination) Select the conditions for outputting the results report for a transmission to a
single destination.
Output On: Select this setting to output the report, regardless of the
transmission result.
If TX Fail: Select this setting to output the report only if the transmission failed.
Output Off: Select this setting to not output the report, regardless of the
transmission result.
TX Report
(Multiple
destinations) Select the conditions for outputting the results report for a transmission to
multiple destinations.
Output On: Select this setting to output the report, regardless of the
transmission result.
If TX Fail: Select this setting to output the report only if the transmission failed.
Output Off: Select this setting to not output the report, regardless of the
transmission result.
Activity Report Select whether or not the activity report is outputted with every 50
transmissions.