10 reports and lists, 1 checking the transmission conditions (tx report), To print a transmission report – Konica Minolta BP-200 User Manual
Page 433: To print a transmission report -2, Utility/ counter
10
Reports and lists
10-2
200/250/350
R
epo
rt
s
a
nd l
is
ts
C
h
a
p
ter
10
10
Reports and lists
10.1
Checking the transmission conditions (TX Report)
The transmission report (TX Report) shows the document number, start date
and time of the transmission, duration of the transmission, destination,
mode, number of pages transmitted, transmission results, and transmission
volume. According to the factory setting, the machine is set to automatically
print a report after every 50 transmissions. The method for manually printing
a report is described below.
!
Detail
To change the report-related settings, refer to User’s Guide [Copy Oper-
ations].
2
Note
If bit 6 of mode 477 is set to “1” in the Software Switch Setting screen,
reports can be printed with “Print Lists” in the Administrator Management
1 screen. For details, refer to “Specifying software switch settings (ma-
chine functions)” on page 9-29.
To print a transmission report
1
Press the [Utility/Counter] key.
2
Touch [Reports].
Utility/
Counter