Konica Minolta BP-200 - Manual (Page 447)

11 Scan function troubleshooting
11-4 200/250/350
S
c
a
n
fun
c
ti
on
tr
oub
les
h
o
o
ti
ng
Chap
ter
11
Scan to FTP
E50XXX
E51XXX
E52XXX Since the POP3 user name or
password is not specified or is
incorrect, reception is not pos-
sible. Check the user name and password set-
tings. Refer to page 2-26.
E60XXX
E61XXX Data incompatible with POP3
reception was received. An e-
mail with a file attachment of a
format other than TIFF-F, or
text that exceeds 1,000 char-
acters per line, or large data,
or an e-mail message contain-
ing no data was received. Check with the sender.
E7XXXX APOP authentication failed. Check the POP3 account and password.
Refer to page 2-26.
ECXXXX The LAN cable is not connect-
ed, communication to the
POP3 server failed, or the user
name and password are not
registered in the server and
differ from the settings on this
machine. Check that the LAN cable is properly
connected and that the POP3 server set-
tings are correct. Refer to page 2-26.
Error code Cause Action
ED09C6 The LAN cable is not connect-
ed, or the destination address
is incorrect. Check that the LAN cable is correctly
connected. Also, check that the settings
for the FTP server address, port number,
and proxy server are correctly specified.
ED09C7 The user name or password is
incorrect. Check the user name and password.
ED09C8 The specified folder does not
exist. Check that the save destination folder
exists and check the folder name.
ED09C9 The FTP server capacity is full. Free up disk space on the FTP server.
ED09CA An error occurred when data
was being transferred. Check that the FTP server is operating
properly, or check that the LAN cable is
not broken.
EF09CF The protocol is incorrect. Ask the administrator to deactivate the
protocol usage restrictions, or look for
other delivery methods.
ED09CC The FTP server is malfunction-
ing if other than the above. Check the status of the FTP server.
EF09CD Available memory is not suffi-
cient. Expand the memory of this machine.
EF09D0 Characters that cannot be
used have been entered. Change the file name.
Error code Cause Action