Konica Minolta BP-200 - Manual (Page 46)

Setup 2
200/250/350 2-13
Se
tu
p
Ch
apte
r 2
3
Use the keypad to type in the IP address.
– You cannot specify an IP address that begins with 0, 127, or 224 or
higher.
– When less than three digits are entered, use [→] to move the cursor
to the next number.
4
Touch [Enter].
Network Board Set
Settings can be specified for the following.
Enter Gateway.
Utility/Counter
Gateway Enter Cancel
Delete
192.168.100.30
100% Memory
Free
Item Description
Auto Selects the transmission speed automatically by auto-negotia-
tion.
100M-Full Manually specifies a transmission speed of 100 Mbps in full-du-
plex mode when the transmission speed cannot be selected au-
tomatically.
100M-Half Manually specifies a transmission speed of 100 Mbps in half-
duplex mode when the transmission speed cannot be selected
automatically.
10M-Full Manually specifies a transmission speed of 10 Mbps in full-du-
plex mode when the transmission speed cannot be selected au-
tomatically.
10M-Half Manually specifies a transmission speed of 10 Mbps in half-du-
plex mode when the transmission speed cannot be selected au-
tomatically.