Kodak 6B6640 - Manual (Page 19)

Troubleshooting
March 2001 2-3
11 Error creating DP2 LUT
folder A folder of the same name may
exist. Change the selected folder name.
101 No response from
device:_devicename_. The device is not responding to
the system. Verify that the device is connected
and on-line.
102 Device not
found:_devicename_. The system was trying to access
a device that it could not find. Verify that the device name on one
of the configuration dialog
windows is correct.
103 The following device is
indicating it is not
ready:_devicename_. The device is not ready. Wait several minutes and try the
activity again.
104 The following device is
busy:_devicename_. The device is busy. Wait several minutes and try the
activity again.
105 The following device is not a
TTY port:_devicename_. The port name in the
configuration file does not refer to
a valid serial port. Change the port name in the
configuration file to a valid serial
port.
106 The following device is
closed:_devicename_. The serial port closed during
system reading. • Verify that no other application
is accessing the port.
• Restart the application.
107 No data on
device:_devicename_. No data is available for the
system to read on the serial port. • Verify that the densitometer is
connected correctly.
• Restart the application.
108 Error:_oserror_occurred
during operation:
_operation_ on device:
_devicename_. An operating system error
occurred. • Rerun the application.
• Reboot the operating system
• If problem continues, call for
service.
109 Invalid Device ID:
_devicename_. A new device was created with an
incorrect device ID. Edit the device ID to reflect the
correct device ID.
Code Status Message Possible Cause/Subsystem Possible Solution