Kodak 6B6640 - Manual (Page 69)

March 2001 4-1
4 Installing and Using the Centralized
Densitometer Application
IMPORTANT: This chapter pertains only to users of WINDOWS NT Systems.
The Centralized Densitometer Application topics covered in this section include:
• Installing the application on a WINDOWS NT System
• Modifying printer and port information
• Viewing graphs
Installing the Centralized Densitometer Application
If you have a network of printers and will be using the Centralized Densitometer
application, install it on the host computer that will be connected to the central
densitometer.
NOTE: The Kodak Professional Device Calibration application must be installed
on each host PC connected to a printer; the Centralized Densitometer
application needs to be installed only on the computer with the
densitometer.
System Requirements
• WINDOWS NT 4.0 with service pack 3 or higher
• 170 KB available disk space
• At least 2 MB main system memory
• CD ROM Drive