Kodak 6B6640 - Manual (Page 26)

Troubleshooting
2-10 March 2001
1202 Error:_error_from
densitometer. An unexpected error was returned
from the densitometer. Calibrate the densitometer. If the
problem continues, check the
manual for the densitometer.
1203 Error: Number of patches
seen by densitometer is
incorrect. Unable densities on densitometer. Try adjusting frame counts or
reread the density patches on the
densitometer.
1300 Values have not been loaded The matrix file is missing. Create a new device.
1301 Data or Matrix files have not
yet been loaded The matrix file is missing. Create a new device.
1302 Data cannot be saved, must
first apply the matrix The matrix file is missing. Create a new device.
Code Status Message Possible Cause/Subsystem Possible Solution