3 using additional calibration features, Installing the calibration software, 3 using additional calibration features -1 – Kodak 6B6640 User Manual
Page 31: Installing the calibration software -1, System requirements -1, Section 3, using additional calibration features, System requirements
March 2001
3-1
3 Using Additional Calibration Features
The topics covered in this section include:
•
Installing the Calibration Software
•
An overview of the Kodak Professional Device Calibration Software
•
Advanced Features of the LED II Calibration Software
•
Installing the Densitometer
IMPORTANT: For the step-by-step procedure to calibrating the printer, see
Section 1, Calibrating the Printer
.
Installing the Calibration Software
Installing the software includes installing both the Kodak Professional Device
Calibration Software (which manages the calibration of multiple Kodak devices)
and the Calibration Software for the Kodak Professional LED II Printer 20P/20R.
You can install the software either from a supplied CD or by downloading from the
Kodak web site.
System Requirements
MACINTOSH Systems
•
Power MACINTOSH System 7.5 or above
•
Minimum of 35 MB free disk space
•
608 K free disk space for each of as many as six configured devices
•
256 colors at 640 x 480 spatial resolution
•
CD ROM Drive
WINDOWS NT Systems
•
100 MHz PENTIUM Processor
•
64 MB Main System Memory
•
VGA Monitor (640 x 480 spatial resolution)
•
CD ROM Drive