Kodak 6B6640 - Manual (Page 52)

Using Additional Calibration Features
3-22 March 2001
Sending Targets
The Send Target feature enables you to send any properly formatted target file to
the printer without performing a calibration. The target file must contain image
data in the format for the Kodak Professional LED II Printer 20P/20R. The format
of this file must be raw RGB pixel interleaved.
To send a test target to the printer:
1. From the Device Calibration window, double-click the device for which you
want to send a test target.
The display shows the LED Calibration Application window.
2. Click the Send Target icon or select Operations->Send Target.