Kyocera Finecam L4 - Manual (Page 10)

Introduction
10
Introduction
<Precautions for Handling Batteries>
● Battery performance will be reduced temporarily in low temperatures. If you are shooting in cold weather,
keep the camera warm inside your jacket and take it out only when needed. Battery performance reduced
by cold temperature will return to normal under normal temperature conditions.
● If the “+” and “–” poles of the battery are soiled with sweat or grease, poor contact will result. Wipe both
poles clean with a dry cloth before use.
● Bring spare battery with you, if you are going on a long trip.
● The camera does not operate if the battery is loaded with “+” and “–” ends wrong.
*Lithium battery pack = Manganese dioxide lithium battery pack(CR-V3).
● The SD logo is a registered trademark.
● Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or
other countries.
● Macintosh, Mac OS, QuickTime, and the QuickTime logo are registered trademarks of Apple Computer,
Inc.
● PRINT Image Matching is trademark of Seiko Epson Corporation. The PRINT Image Matching logo is a
trademark of Seiko Epson Corporation.
● Kodak and EasyShare are the registered trademark of Eastman Kodak Company.
● Eastman Kodak Company, Rochester, NY 14650
● USB DIRECT-PRINT is trademark of Seiko Epson Corporation.
● All other corporate and brand names are the registered trademarks or trademarks of their respective
owners.
PRINT Image Matching
This product supports PRINT Image Matching II. When used in combination, PRINT Image Matching II
enabled digital still cameras, printers and software help photographers to produce images more faithful to
their intentions.
USB DIRECT-PRINT
● This digital camera supports the USB DIRECT-PRINT function and can directly be connected to the printer
supporting the USB DIRECT-PRINT by a USB cable. After that, you can select an image on the monitor of
the digital camera and operate the monitor to start printing.
CAUTION
● Do not touch the poles with a conductive object such as metal tweezers. Failure to do
so will not only shorten the battery life but also cause a short circuit. It is danger.
WARNING
● Insulate the used battery by taping the contacts when dumping it. Otherwise, it might
explode or catch fire if it contact with other metals.
● Be sure to follow the following items. Otherwise, the battery will explode, causing a fire,
an injury or dirty surroundings.
1 Do not use the batteries that were not designed for this camera.
2 Do not load the battery with “+” and “–” ends wrong.
3 Do not throw the battery into a fire, and do not short-circuit charge, disassemble or
heat the battery.
4 Never charge the alkaline, lithium and nickel batteries.
● Keep the battery out of reach of children. If they should swallow the battery, the battery
might be broken to damage the stomach or bowels. Immediately consult your doctor.
Make sure to read this page carefully.
01_8CQ_Introduction2.fm Page 10 Friday, June 6, 2003 1:50 PM