Kyocera Finecam L4 - Manual (Page 95)

Appendix
95
Ap
pe
nd
ix
Messages and Remedies
Message Cause Remedy
“MEMORY CARD FULL” The memory card has
insufficient free memory
available. Insert a new memory card, or
erase unneeded images on the
current card.
Or, change the setting of image
size or quality.
“NO CARD” No memory card is loaded. Insert a memory card.
“WRITE PROTECT” The write protect switch is
activated (SD memory card). Release the write protect
switch, or insert a different
memory card. (page 15)
“CARD ERROR”
The inserted memory card has
been formatted in a different
camera or information device. Reformat the memory card in
the camera. (page 82)
The memory card format is not
compatible with the camera. Insert another memory card or
format it.
Memory card is not loaded
correctly. Remove the memory card and
reload it correctly.
“NO IMAGE”
Nothing is recorded on the
memory card. ● Insert a memory card with
recorded image data.
● Take a picture.
“CANCEL PRINT”
Printing is cancelled from the
printer or camera. Return the menu of [Direct
Print] by selecting [Check] or
[Cancel].
If you restart printing, check the
status of the printer or the
camera.
If you cannot print the images,
turn off the powers of the
camera and the printer once
and turn on them. After that,
restart printing.
“PRINTER BUSY”
Start printing from the camera
when the printer is starting or
operating.
“PRINTER ERROR”
Printer has any trouble, such as
ink shortage or paper jam.
“NO PLAYBACK”
It appears when the image is
broken or the image was
restored in the PC. Take a picture again.
00_8CQ.book Page 95 Wednesday, May 14, 2003 8:10 PM