Kyocera Finecam L4 User Manual

Page 15

Advertising
background image

Preparation of Camera

15

Pre

p

a

ratio

n of

Camera

Removing the memory card

Push the memory card once so that the card comes
out. Then pull out the card.

Write Protect Switch (SD Memory Cards only)

SD Memory Cards are provided with a
write protect switch.
When this switch is moved downward,
further recording on the card is disable and
any images and data already on the card
are protected.

While the card is write-protected, shooting
or erasing images are disabled and the
“WRITE PROTECT” will be displayed on
the LCD monitor.

The AA batteries may also be used.

You can also use 2 nickel metal hydride rechargeable battery and 2AA nickel batteries other
than the supplied lithium battery pack (CR-V3).

● In comparison with the supplied CR-V3,

the recording capacity and playback time
will be shortened by using the batteries
above.

● Manganese batteries have low electric

capacity to use for the camera. If they
should be used, their state may improp-
erly be detected, causing malfunction of
the camera.

Write protect

switch

Slide down to lock.

WRITE PROTECT

02_8CQ_Preparations.fm Page 15 Wednesday, May 28, 2003 9:29 PM

Advertising
This manual is related to the following products: