Kyocera Finecam L4 - Manual (Page 102)

Appendix
102
Ap
pen
dix
Optional Accessories
AC Adapter AC-74L
You don't have to pay attention to the battery capacity if you use this adapter to do a long
playback or connect a PC.
Connecting AC Adapter AC-74L
<AC Adapter Handling Precautions>
● Prolonged use may cause the AC adapter to feel warm; this is a normal phenomenon and not a
malfunction.
● When not using the AC adapter for an extended period of time, first remove the plug from the camera body,
then disconnect the adapter from its AC outlet.
● If you wish to use the AC adapter while batteries are loaded in the camera, first set the camera's power
switch to OFF, then connect the AC adapter before turning on the camera again.
● The AC adapter has been designed for exclusive use with this camera. To prevent the danger of fire and
electrical shock, do not use the adapter with products other than the specific digital camera for which it
was designed.
WARNING
● Be sure that AC adapter plug is connected securely before use. Loose plugs and poor
contacts can cause generation of heat, fire, and electrical shock.
● Do not attempt to modify the AC adapter's cords, or subject them to unreasonable
force. Damage to the cords can cause fires and electrical shock. If cords become so
damaged that their wire cores are exposed, discontinue using them and consult your
dealer or Kyocera/Yashica Service Center.
● Do not attempt to remove covers, disassemble, repair or modify your AC adapter, since
dangerous electrical shock could result.
● AC adapters that have become laden with dirt or household dust should not be used or
approached with metal objects, since electricity might be transmitted through the
metal, causing fire or personal electrical shock. In the event of heavy soiling of a plug,
remove it from its outlet and clean away the dirt before reusing.
● In the event that an AC adapter plug emits smoke or unusual smell or sound, or if it is
damaged by impact or falling, cease use immediately. Continuing to use a damaged
plug could result in fire danger. In the event of damage to a plug, consult your dealer or
Kyocera/Yashica Service Center.
● Do not connect the AC adapter to any sources of power other than a household AC
outlet (AC 100V to 240 V; 50/60Hz). Using the adapter with other voltages or ratings
may cause the hazard of fire or electrical shock.
CAUTION
● Use the designated AC adapter. Using other adapters may result in unexpected
accidents and fire danger.
● Never attempt to splice the AC adapter cord, or subject it to severe twisting, bending,
or stretching.
● Do not handle the AC adapter with wet hands, since personal electrical shock could
result.
● Always grasp the plug body (not cord) when removing the AC adapter plugs from
camera and power outlet. Pulling on the cords could cause breakage or other damage
to the wires, resulting in danger of fire or electrical shock.
● If you observe any damage to the AC adapter, including broken wires and faulty plug
contacts, discontinue using the AC adapter and consult your dealer Kyocera/Yashica
Service Center.
00_8CQ.book Page 102 Wednesday, May 14, 2003 8:10 PM