Kyocera Finecam L4 - Manual (Page 86)

Using Setup “SET UP” Mode Functions
86
SET UP
You can use this function in camera modes or in movie modes.
Operation
Turn on the power first and set the [CUSTOM SET.] in Setup modes to [LCD
BRIGHT].
1
Set the mode select dial to “s” or “m”.
2
Press the (+) and (–) buttons to set the brightness on the LCD.
To make the display brighter, press the (+) button.
To make the display darker, press the (–) button.
● The brightness setting determined with the (+) and (–) buttons will be released when any of
the following operations are executed. To fix the brightness on the LCD, set the value using
[BRIGHT CNTRL] (page 80) in the SETUP mode.
· Pressing the menu button
· Turning the mode select dial to switch over to other modes
· Turning off the power switch
The compensation value can be set between –2.0 and +2.0 in 0.3 (EV) steps by
pressing the (+) or (–) button each time.
Operation
Turn on the power first and set the [CUSTOM SET.] in Setup modes to [EX COMP].
1
Set the mode select dial to “s” or “m”.
Operations when [LCD BRIGHT] is selected
Operations when [EX COMP] is selected
DISP.
MENU
00_8CQ.book Page 86 Wednesday, May 14, 2003 8:10 PM