Kyocera Finecam L4 - Manual (Page 71)

Using Playback “p” Mode Functions
71
p
6
Press the MENU button to finish the operation.
[ERASE ALL] Erasing All Images
You can erase all images recorded in the memory card.
● Use caution when erasing an image. You cannot restore the erased image.
● The protected images cannot be erased. (page 70)
● You cannot use this operation while the SD memory card is write-protected. For write protect,
see page 15.
To Erase All Images
1
Turn on the power and set the mode select dial to “p”.
5
Press the MENU button to finish the operation.
3
Use the directional keypad to select [ERASE],
then press the e button.
4
Press Left or Right on the directional keypad to
select the image you wish to erase.
5
Press Up on the directional keypad to select [EXE-
CUTE], then press the e button to erase the
image.
● To erase other images, repeat steps 4 and 5.
2
Press the MENU button to display the menu icons.
3
Press Left or Right on the directional keypad to
select
[ERASE ALL], then press the e button.
4
Press Up on the directional keypad to select [EXE-
CUTE], then press the e button to erase all
images.
● A message “NO IMAGE” appears on the LCD. If an image
appears, it is presumed that the displayed image is protected
and was not deleted by the operation above.
ERASE IMAGE?
EXECUTE
CANCEL
ERASE ALL
ERASE ALL?
EXECUTE
CANCEL
00_8CQ.book Page 71 Wednesday, May 14, 2003 8:10 PM