Kyocera Finecam L4 - Manual (Page 79)

Using Playback “p” Mode Functions
79
p
A Useful Way to Erase Images Using the Protect and All Erase Functions
If, for example, you have recorded 100 images and you only want to keep 5 or 6 of
them, erasing the unwanted images one at a time is difficult work. If you have
recorded a lot of images and only wish to keep a few, use [PROTECT] and
[ERASE ALL] to make the operation easier.
First, protect the images that should be kept. (Use the multiple image display.)
1
Display the menu icons and select [PROTECT].
Then, erase all images.
2
Press Left or Right on the directional keypad to
display the image desired that should be kept,
then press the e button.
Repeat this procedure to select the images that should be
kept.
1
Display the menu icons to select [ERASE ALL]
then press the e button.
[ERASE ALL?] appears on the screen.
2
Select [EXECUTE], then press the e button to erase all images.
3
Protected images will not be erased but kept in
the memory card.
PROTECTION?
SET
RETURN
ERASE ALL?
EXECUTE
CANCEL
00_8CQ.book Page 79 Wednesday, May 14, 2003 8:10 PM